长期供应瑞士EMS PA6 BG-50 FC 价格合理,诚信经营,可全国供货(广东省内 免费送货上门)。
“十年老店,完备售后,信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足,发货准时,交期和质量均有保障!
根据客户要求,可提供塑胶原料相关报告。如:ROHS(SGS)报告,UL认证,材质证明及物质安全资料表(MSDS)!
欢迎来电咨询7*24全天候服务热线:13686017791 易小姐 QQ:335171600
收缩率数据表
英文缩写 中文简称 规格 比重 收缩率%
PA 聚酰胺(尼龙) PA66 1.13-1.15 0.8-1.5
PA 聚酰胺(尼龙) PA66GF30 1.38 0.5
PA 聚酰胺(尼龙) PA6 1.12-1.140.8-1.5
PA聚酰胺(尼龙) PA6GF30 1.35-1.42 0.4-0.6
PA 聚酰胺(尼龙) PA66/PA6 1.08-1.14 0.5-1.5
PA 聚酰胺(尼龙) PA6/PA12 1.06-1.08 1.1
PA 聚酰胺(尼龙) PA6/PA12GF30 1.31-1.380.3
PA 聚酰胺(尼龙) PA6/PA9 1.08-1.1 1-1.5
PA 聚酰胺(尼龙) PA6/PA10 1.07-1.09 1.2
PA 聚酰胺(尼龙) PA6/PA10GF30 1.31-1.38 0.4
PC (polycarbonate # bulletproof glue) /KO1989/ Korea Kolon
Uses: other
Important parameters: melt flow rate: 25 g/10min density: 1.2 g/cm3 notched impact strength: 98 tensile strength: 63.7 MPa, elongation at break: 110% bending strength: 98.1 MPa bending modulus: 2400 MPa, hot deformation temperature: 131 DEG C
Manufacturer: Korea long Corporation
PC (polycarbonate # bulletproof glue) /DR-10 / Adell
Uses: other
Characteristic note: general purpose
Important parameters: water absorption: 0.25% notched impact strength: 800 tensile strength: 68.9 MPa, elongation at break: 130% bending strength: 96.5 MPa bending modulus: 2340 MPa
Manufacturer: Adell Plastics Corporation of America
PC (polycarbonate # bulletproof glue) /77062C/ Yuyao Wanyun
Uses: other
Characteristic note: light diffusion, high penetration. Product wall thickness: 1.5-2.5mm
Important parameter: melt flow rate: 12 g/10min
Manufacturer: Yuyao Wan Yun Plastics Co., Ltd.
PC (polycarbonate # bulletproof glue) /KLL10CP/ Elizabeth Foundation (GE)
Uses: other
Important parameter:
Manufacturer: SABIC innovative plastics (GE)
PC (polycarbonate # bulletproof glue) /101V/ Foshan crystallization
Uses: household appliances, automotive parts
Important parameter:
Manufacturer: Foshan crystalline Engineering Plastics Co., Ltd.
PC (polycarbonate # bulletproof glue) /100X-E/ Germany Almaak
Uses: other
Important parameters: density: 1.2 g/cm3 water absorption: 0.15% notched impact strength: 65 tensile strength: 65 MPa, elongation at break: 85% VEKA softening point: 140 DEG C
Manufacturer: Almaak, Germany
PC (polycarbonate # bulletproof glue) /F1/ Luxi group
Uses: electronic appliances, lighting fixtures
Important parameters: notched impact strength: 73 tensile strength: 73 MPa, elongation at break: 120% bending strength: 59 MPa, hot deformation temperature: 128 DEG C
Manufacturer: Luxi Group Co., Ltd.
PC (polycarbonate # bulletproof glue) Yuyao shuangxiang nanometer /PC-01/
Uses: other
Characteristic note: anti cooking, cracking resistance, carbon ester, the most prominent advantage is good heat resistance, water, can be used for a long time under water, stress resistance cracking greatly improved.
Important parameters: notched impact strength: 22 tensile strength: 57.6 MPa, elongation at break: 68% bending strength: 88 MPa, hot deformation temperature: 128 DEG C
Manufacturer: Yuyao double elephant nanometer plastic industry Co., Ltd.
PC (polycarbonate # bulletproof glue) /8025/ and cosmos
Uses: other
Important parameters: density: 1.35 g/cm3 water absorption: 0.25% molding shrinkage: 0.375% notched impact strength: 8 oxygen index: 30% tensile strength: 60 MPa elongation at break: 4% VEKA softening point: 147 degrees of hot deformation temperature: 136 degrees C
Manufacturer: a polymer (Chinese) cosmos Co. ltd..
PC (polycarbonate # bulletproof glue) /9125/ and cosmos
Uses: other
Important parameters: density: 1.35 g/cm3 water absorption: 0.25% molding shrinkage: 0.4% notched impact strength: 8 oxygen index: 38% tensile strength: 90 MPa elongation at break: 2.5% VEKA softening point: 145 degrees of hot deformation temperature: 138 degrees C
Manufacturer: a polymer (Chinese) cosmos Co. ltd..